|Minimum Order Quantity||1 Piece|
|Capacity (KLD/MLD)||10 KLD - 1 MLD|
|Inlet Flow Rate(m3/day or m3/hr)||1000 m3/day|
|Treatment Technique||Multi Effect Evaporator|
|Material Of Construction||Mild Steel|
|Water Source||Industrial Effluent|
|Deliver Type||PAN India|
|Country of Origin||Made in India|
Installation type are complete civil work, perbrabicated, containerized plug and play
Capacity in KLD are also available in 10kld, 20kld, 50kld, 100kld, 150kld, 200kld, 500kld, 1000kld.
Feeb flow rate are 100 m3/day, 500 m3/day, 1000 m3/day, 2000 m3/day, 5000 m3/day, 10000 m3/day.
The specific technologies that will make up a facility’s ZLD treatment system will vary greatly depending on (1.) the volume of dissolved material present in the waste, (2.) the system’s required flow rate, and (3.) what specific contaminants are present, but will generally consist of a three-step process with the following “blocks” of treatment:
Pretreatment and conditioning; removes simple things from the wastewater stream that can be filtered or precipitated out, conditioning the water and reducing the suspended solids and materials that would otherwise scale and/or foul following treatment steps.
Phase-one concentration. Concentrating is usually done with membranes like reverse osmosis (RO), brine concentrators, or electrodialysis. These technologies take this stream and concentrate it down to a high salinity and pull out up to 60–80% of the water.
Evaporation/crystallization. After the concentration step is complete, the next step is generating a solid, which is done through thermal processes or evaporation, where you evaporate all the water off, collect it, and reuse it. The leftover waste then goes from an evaporator to a crystallizer, which continues to boil off all the water until all the impurities in the water crystallize and are filtered out as a solid.
Reviewed by 16 Users
Most Relevant Reviews